VS-67XL50U

Mitsubishi Expertise Sets the New Global Standard in Display Walls.

Features

1024 x 768 Native XGA Resolution
DLP™ (0.7" 12-degree DMD™ 1 Chip)
High Brightness of 500 cd/m² (Bright mode)
1600:1 Contrast ratio
Space-saving, lightweight design - only 77.8 cm deep
Typical Screen-to-Screen Gap - 2mm
Option Board for Video, Scaling and UXGA

The 67" VS-67XL50U sets the new global standard in Display Wall solutions. Its high brightness of 500cd/m² and super-high contrast ratio of 1600:1, combined with superior image processing, vivid colour rendition and a host of performance-enhancing features produces an exceptionally sharp, perfectly balanced image across the entire display wall area.

This model employs the same basic light engine as the 50" VS-50XL50U yet provides a larger screen size for applications where viewing distances can accommodate a lower pixel density per inch with the benefit of a larger viewing area.

	Dynamic Brightness Balancing Each Mitsubishi display wall cube is equipped with a built-in brightness sensor (brightness is measured every 2 seconds). The Dynamic Brightness Balancing circuit then communicates the measured brightness data between all cubes and automatically performs the necessary adjustments to maintain optimum brightness uniformity across the entire display wall.
	Colour Space Control Mitsubishi's original industry proven Digital Colour Space Control (digital colour balancing and blending circuit) compensates for colour and brightness differences among multi-screen configurations. This system adjusts the Gain, and the Red, Green and Blue (RGB) primary colours, plus other mixed colours to provide consistent colour blending and brilliance uniformity across the entire display wall.
	Smart Lamp The lamp module of each Mitsubishi display wall cube stores its own colour characteristics. This data is then utilized when replacing the lamp in one or more cubes within the display wall. Upon replacement, the cube with the new lamp automatically communicates that lamp‘s data with all other cubes and performs the Colour Space Control adjustment to rebalance the entire display wall, saving time and reducing maintenance costs.
	Smart Colourwheel The colour wheel module of each Mitsubishi display wall cube stores its own colour characteristics. This data is then utilized when replacing the colour wheel in one or more cubes within the display wall. Upon replacement, the cube with the new colour wheel automatically communicates that colour wheel‘s data with all other cubes and performs the Colour Space Control adjustment to rebalance the entire display wall, saving time and reducing maintenance costs.
	12 Bit Dither & Gamma Circuit Mitsubishi's original 12-Bit Dither & Gamma Circuit enables the display of truly natural gradation (gray-scale) by accurately rendering both bright and dark areas for precise half-tone images. This circuit also processes frame (time axis) direction to ensure smoother gradation and optimum colour fidelity for all images.
	Digital Gradation Circuit Mitsubishi's original 12-Bit Digital Gradation Circuit can elevate the brightness level at the edges of the screen - where brightness usually fades, in order to ensure the optimum brightness distribution and uniformity over multi-screen tiled configurations.
	High Contrast Ratio The combination of Mitsubishi's original high quality new optical system, super high-contrast screen and 12-degree DMD™ DDR chip (with black metal coating), allow the VS-67XL50U Display Wall Cube to deliver an outstanding contrast ratio of 1600:1 and reproduce sharp, brilliant images with rich, vibrant colours.

And More...	Option Board allows for daisy-chain of up to 16 cubes without an external processor. Accepts a wide range of input signals from VGA – SXGA as standard. Front viewable LED status indicator can be viewed even when lamp is off. Brightness optimization mechanism for maximum light output. Dual Brightness modes – select between high brightness or longer lamp life. Space-saving, light-weight design with easy-access rear service panel doors. Sealed engine room keeps dust out of the cube enclosure to further reduce maintenance costs. Automatic lamp changer model (VS-67XLW50U) available.

Specification Overview

Model		VS-67XL50U
Technology		12degree 0.7" DMD™ single-chip DLP™ technology from Texas Instruments
Screen size		67" diagonal viewable (1701 mm)
Native Resolution		1024 x 768 pixels (XGA)
Brightness		Bright – 500 cd/m² (typical); 146 ft-L (typical) Normal – 400 cd/m² (typical); 117 ft-L (typical)
Contrast Ratio		1600:1 (typical)
Lamp System	Lamp	Ultra-high pressure mercury lamp 100/120 W
Input Scanning Frequency		31.5 – 64.0 kHz (horizontal) 49 - 61 Hz (vertical)
Signal Input Terminals	Analog	5 BNC (RGBHV) x 1 Video: 0.7VP-P positive / 75 Ohm Synchronous: TTL level (positive/negative) High Level: 2.5-5.0V / Low Level: 0-0.5V Sync On Green: Video: 0.7Vp-p positive Synchronous: 0.3Vp-p negative
Signal Input Terminals	Digital	TMDS (DVI-D x 1)
Current Consumption		195/195 W
Power Supply		AC100-240 V, 50/60 Hz
Temperature and Humidity		Condition at Operation: 10-35°C 20-80% non-condensing Condition at Storage: -20-50°C 20-80% non-condensing
Dimension		1361 x 1180 x 778 mm
Weight		91 kg
Regulatory	Safety	UL60950, CSA22.2 No.60950, EN60950, Approved by UL
Regulatory	EMC	FCC part 15 Class A, Industry Canada Class A, EN55022 Class A, EN55024, EN61000-3-2, EN61000-3-3